TinaRiver Board      
  TinaRiver Platform  

Powered with Cortina CS3512 processor
and Conexant Viking™ II Plus ADSL2/2plus

Dual WAN interfaces for ADSL2+ and 3G
USB 2.0 port enabling 3G broadband
connection as backup (available from
your service provider)
ADSL Auto Fail-over to 3G (backup)
function to ensure always-on connection

TinaRiver 3G / ADSL 2+ VPN Wireless Router is integrated with rich features comprise of ADSL2+, 3G, wireless N and IPsec VPN as a one
convergence platform for secured wired and wireless solutions. ADSL2+ provides downstream speed up to 24 Mbps for wired
communication, while alternate built-in USB port enabling to use HSPA, UMTS (WCDMA), EDGE, GPRS, or GSM wireless connection allows up
to 14.4Mbps downstream possible. The broadband expansion of 3G through USB port supports a wide range of 3G USB modems. Supported
with ADSL auto fail-over to 3G function, TinaRiver’s dual WAN interfaces allow 3G automatically acting as a backup WAN without compromise
in the unavailability of internet connection when ADSL connection breaks down.

TinaRiver 3G / ADSL 2+ VPN Wireless Router connects over either ADSL2+ or 3G network to deliver uninterrupted connectivity. The 802.11n
standard enables even faster wireless speed and greater coverage than 802.11b/g standard. Ideally, broadband access is no longer limited to
one single model – wired ADSL connection; 3G mobility connection allows the router as an access point to provide Wi-Fi access wherever a
3G connection is available.

This product integrated IPSec VPN function, having a secure VPN connection is enabling you are more freely to access your corporate intranet
and transmit sensitive data between two remote sites with encrypted connection.

Flexcomm offers custom design and service of the product.

TinaRiver Block Diagram

TinaGarden Block Diagram

Network Processor
Cortina CS3512, 300MHz, 32-bit RISC processor
Conexant Viking™ II Plus ADSL2/2plus chipset
NOR Flash
8MB/16MB NOR Flash (32MB optional)
Through USB connection with Auto Fail-over function
Standards compliant:
ITU G.992.5 (ADSL2plus), ITU G.992.3 (G.DMT.bis), ITU G.992.1 (G.DMT),
ITU G.992.2 (G.Lite), ITU G.992 Annex A, Annex B, and ANSI T1.413 Issue 2
Data Rates:
ADSL2+: 24Mbps downstream, 1Mbps upstream
ADSL2: 12Mbps downstream, 1Mbps upstream
G.lite: 1.5Mbps downstream, 512Kbps upstream
G.dmt: 8Mbps downstream, 832Kbps upstream
Support point-to-point protocol over ATM (PPPoATM),
Point-to-point protocol over Ethernet (PPPoEthernet),
Ethernet over ATM (EoATM), and Internet protocol over ATM (IPoATM)
RFC 2684 - multi protocol encapsulation over AAL5
RFC 2225 - Classical IPoATM
RFC 2516 - PPPoEthernet
RFC 2364 - PPPoATM
DSL Forum TR-37 compliant and single-ended auto configuration
Asynchronous transfer mode (ATM) / Unspecified bit rate (UBR) / variable bit rate (VBR) /
Constant bit rate (CBR) services
Supports zero installation PPP bridge mode (ZIPB)
Support IEEE 802.11n up to 300Mbps, backward compatible IEEE802.11b/g
Support 802.1x, WEP, WPA/WPA-PSK, WPA2-PSK encryption
WiMAX USB connector (optional)
Embedded IPSec, L2TP & PPTP client / server
Hardware Security Acceleration Engine performs DES, 3DES, AES, CCMP, and RC4
encryption/decryption with CBC or ECB mode operation
Support Tunnel and Transport Mode
1 x 10/100 Fast Ethernet WAN port
4 x 10/100 Fast Ethernet LAN port
1 x full speed USB 2.0
1 x Type III A miniPCI slot
HW Reset
1 x Hardware Reset
Power Jack
DC +12V @ 2A
110mm x 146mm
    Product Brochure
    Product Code:TINARIVER
  Our product is compatible with RoHS  
  More information please contact us via sales@flexcomm.com.cn