Flexcomm TinaGarden

Product Brief

Flexcomm TinaGarden is an Wireless Gigabits Router with BT download function for SOHO/SME market. It is based on Cortina? latest CS3512 network storage processor with up to 300MHz core frequency. TINAGARDEN series support 1 GE WAN and 4 GE LAN. With miniPCI slot which allows latest 802.11n WLAN access via 802 11a/b/g/n Wi-Fi card, the wireless transmitting rate is enhanced observably; especially, when we lead in PoE/PoE Plus module in this platform. It can support the GE POE application and be a much more attractive and integrated gateway platform with the applications of these two technologies.

TinaGarden provides 2 SATA interfaces and 2 USB 2.0 OTG ports, which enable connection to up to 4 storage devices including the internal HDD and external USB HDD or USB Flash. Users can easily download the multimedia contents from the website though ftp, http and Bit Torrent. Meanwhile, TinaGarden can also regarded as file/streaming server provide high capacity data backup and HD home entertainment.

As mass production ready product, Customers can adopt TinaGarden directly as their end product. However, abundant interface will help the customer to extend their own functions without any engineering cost. Flexcomm would like to support customer development to expedite customized design and to maximum customersí» benefit.

Block Diagram

Product Highlight

  • Hardware NAT combined with Gigabit Ethernet guarantee the TURE Gigabit packet forwarding.
  • Hardware security acceleration engine enables high performance IPSec VPN.
  • 802.11n wireless LAN support data rate up to 300Mbps.
  • Two integrated Hi-Speed USB 2.0 controller adds multimedia services, such as video conferencing and NAS.
  • Meet with the market requirments for a flexible customer-oriented platform, customers can base their designs on portions of the reference design.

Network Features

Network Processor

Cortina SL3512,300MHz, 32-bit RISC ARM9 processor

Switch Controller

VSC7395 GE switch chip


64/128/256MB DDR SDRAM


8/16MB NOR Flash (32MB optional)


128/256/512MB NAND Flash (1GB or above optional)


802.11 a/b/g/n via miniPCI (Optional)


802.16e Wave 2 WiMAX via USB upright connector


Two port USB2.0, Full-speed


4x10/100/1000 Ethernet LAN ports


1x10/100/1000 Ethernet WAN port


2xType III A miniPCI slot


2x SATA connectors


1x IDE connector (optional)


1x RTC

LED Indicators
LAN / WAN Link / Activity indicators
Wireless Link / Activity indicators
SATA / IDE busy / idle indicators
Power-on indicator

1x Crypto IC

Panel Button

Up/Down/Left/Right/Enter keys

HW Reset

1x hardware reset

Factory Reset

1x factory reset

Power Jack

DC +12V@2A


Draft 802.3at PoE plus (24W) via WAN


1x RS232 Pin Header

Debug Support

1x JTAG Header


175 mm x 123 mm x 35mm


Software Features

Stateful Packet Inspection
PPTP/IPSec/L2TP pass-through
Linux Kernel 2.6.15
QoS attack prevention
JFFS2 Root File system
Intrusion detection
NAND Flash driver
DDoS defense
Boot from NAND flash
Start Kernel from hard drive
NAS and BT download:
FTP server
Router and Firewall:
TFTP client
Static Routing
DHCP server and WAN DHCP client
Routing table control
HTTP server
WAN-LAN transparent bridging
NFS server
WiFi to wired LAN bridging
Dynamic DNS
802.11n AP and Ad-Hoc client
UPnP server
Software NAT
HDD Access
Hardware NAT enabled by
Samba server
XFS, NTFS, EXT2, EXT3, and FAT32 File Systems
Static NAT
Bit Torrent download
Static NAPT
Web browser based management
802.1q VLAN
Remote management
802.1p QoS
Save/Restore configuration files
MAC cloning
Factory setting restore reset
802.1X MAC address authentication
Firmware remote upgrade
64/128bit WEP
Device discovery

*Our product is compatible with ROHS

*More information, please contact us via sales@flexcomm.com.cn


í˝ Flexcomm TinaGarden Product Brief [PDF File]